Chicago Electric 91332 - Manual (Page 6)

SKU 91332 Page 6
REV 07i
Using the Cordless Screwdriver
1.
Pistol Grip
Straight Grip
Grip Button Lock
Rocker Switch
(Forward /Reverse)
Chuck (1)
To change the screwdriver handle grip from straight to pistol grip, slide
the Grip Button Lock forward, while at the same time twisting the handle
counterclockwise. See the two illustrations above.
2. Insert the desired bit, driver, or adapter into the Chuck (1).
3. Engage the bit, driver, or adapter over the item being turned.
4. Press forward on the Rocker Switch for turning clockwise.
5. Press backward on the Rocker Switch for turning counterclockwise.
Maintenance
1. When finished using the Screwdriver, place it in the Blowmold case along
with all the accessories.
2. Store in a clean and dry location.
3. Recharge the batteries once a month whether used or not.