Chicago Electric 91332 - Manual (Page 2)

SKU 91332 Page 2
Specifications
Battery Pack 3.6 VDC, Ni-Cd, 600 mAh
Charging Time 5 to 7 hours
Charger Adapter Input: 120 VAC, 60 Hz;
Output: 5 VDC, 300 mA
Speed 200 RPM
Power Switch Reversing rocker switch
Features Twist Handle for pistol or straight grip
Accessories 8 – Hex drive SAE sockets
5 – Slot driver bits
4 – Cross driver bits
4 – Posidriv ® -type (ANSI Type IA) drive bits
6 – Hex drive SAE / fractional bits
8 – Star (hexalobular internal) drive bits
1 – 2” magnetic tip
1 – 1” hex adapter
1 – 1” (L) x ¼” hex adapter
1 – Blowmold case
Save This Manual
You will need the manual for the safety warnings and precautions, assembly in-
structions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be fol-
lowed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in
damp or wet locations. Don’t expose to rain. Keep work area well lighted.
Do not use electrically powered tools in the presence of flammable gases or
liquids.
3. Keep children away. Children must never be allowed in the work area. Do
not let them handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of
children.
5. Use the right tool for the job. Do not attempt to force a small tool or