Centro 3900 - Manual (Page 6)

8 9
5
6
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
YOU WILL NEED:
7
8
2 4 5
a. Position the top lid and burner box assembly
(A and B) onto cart assembly (C) as shown.
b. Use the hardware to connect both parts, on
the left and right sides, at the three points
indicated in Figure B and C.
THIS STEP REQUIRES 3 OR MORE PEOPLE.
DO NOT ATTEMPT ALONE. EXTREMELY
HEAVY.
B C
A
Attach the upper back panel (CM) to both the left
and right side panels (EA and EB).
Only install hardware in the bottom portion of the
back panel, as shown in fi gure B.
DO NOT TIGHTEN SCREWS UNTIL SIDE SHELF HAS
BEEN INSTALLED CM
Back view
EB
EA
A + B
C
B
Attach the right side shelf fascia (DH) to the right
side shelf table (DG), as shown.
DH
DG
TIP: To position the right side shelf, insert the two
hooks on the side shelf assembly into the two
openings located on the right upper side panel
(BC).
Assemble the right side shelf assembly to the cart
assembly, as shown in fi gure B.
DO NOT TIGHTEN SCREWS UNTIL THE SIDE
SHELF HAS BEEN INSTALLED.
DG
DH
*
B
BC
8 7 6
YOU WILL NEED:
6 7 8
X 6
X 2
X 6
X 2
X 6
X 2
8 7 6
YOU WILL NEED:
6 7 8
X 3 X 3 X 3
YOU WILL NEED:
A
A
B
B
B
B
B
2
3
4
4
5
5
X 1 X 1 X 1
X 4 X 4 X 4