Folding the stroller, Using the harness, Warning – Combi 7040 Series User Manual
Page 5: Using the safety cover (boot)
- 5 -
Folding the Stroller
1. Remove all items from the
basket.
2. Lock all front swivel wheels.
3. Make sure seat backs are in
the upright position.
4. Fold both canopies by
lifting up on
the canopy levers.
5. Remove your player
from the back pocket
of the canopy.
6. While lifting
up the folding
levers on both
sides of the
handle, tilt the
stroller back
until it folds
together.
7. Fold together by
bringing the sides
of the handle
together until the
canopies face each
other in the
middle.
8. Lock the folding latch to
hold the stroller together.
Folding
Latch
1
3
2
The stroller can be pulled behind
you as shown in diagram A or
carried over your shoulder as
shown in diagram B.
Velcro
Unbuckling the Harness
1. Press levers down on right and left harness hooks
to detach from buckle tongues.
2. Press buckle button down (with Combi logo) and
detach buckle tongues from buckle.
Buckling the Harness
1. Place the crotch belt between the baby’s legs.
2. Insert buckle tongues into buckle.
3. Lift buckle with tongues inserted and attach right and left hook to holes in buckle
tongue
4. To adjust the harness or waist belt, loosen the slack on both sides of each
buckle.
Using the Harness
CAUTION
Even when the harness
is fastened, be careful
not to let the child slip
out or stand.
WARNING
Avoid serious injury from falling
or sliding out. Always use the
5-point harness.
Using the Safety Cover (Boot)
CAUTION
Before folding the stroller,
unfasten and store the
safety cover (boot) under
the seat. The stroller will
not fold with it attached.
Installing the Safety Cover (Boot)
1. Lift the seat cushion and pull safety cover (boot) out.
2. Place the safety cover (boot) over the guardrail and secure it
with the velcro.
WARNING:
Child may slip
into leg openings and strangle.
Never use in reclined carriage
position(s) unless safety cover
(boot) is securely fastened.