CREATIVE Ipod Xdock - Manual (Page 11)

Using Your Xdock 10
Turning on Xdock or enabling Standby mode
Press the Power/Standby button on your remote control to turn on Xdock
or enable Standby mode. For Power/Standby LED information, see
“Understanding the Power/Standby LED” below.
Returning to factory default settings
Press and hold the Previous/Rewind and Next/Fast-forward buttons on your
Xdock together for three seconds. The Volume LED ring lights up. For more
information, see “FAQs” on page 17.
Understanding the Power/Standby LED
NOTES You can also press the Power/Standby button on Xdock.
LED Behavior Status
Blue Stable Turned on and ready for use.
Red Stable In Standby mode.
Flashing Muted.
NOTES For information on the Link LED, see the Creative X-Fi Wireless
Receiver User’s Guide.