Dodge 2015 Durango - User Guide - Manual (Page 174)

6. Slide the metal stamping up the steel extension tube and winch cable. Rotate the
metal stamping and push it through the hole in the plastic plate and wheel.
7. Pinch the three short and two long tubes to remove the protective plate from the steel
spare wheel.
Preparations For Jacking
1. Park the vehicle on a firm level surface, away from traffic for your safety.
2. Turn the engine off, place the transmission in PARK, fully depress the pedal to the floor
to set the parking brake, and activate the Hazard Warning flashers.
Retainer Removal
Protective Plate Removal
W H AT T O D O I N E M E R G E N C I E S
172