Driver information display (did), Compass calibration – Dodge 2015 Durango - User Guide User Manual
Page 145

DRIVER INFORMATION DISPLAY (DID)
The DID features a driver interactive display that is located in the instrument cluster.
Pushing the controls on the left side of the steering wheel allows the driver to select
vehicle information and Personal Settings. For additional information, refer to “Program-
mable Features” in this guide.
• Push the UP
button to scroll up-
ward through the main menus (Speed-
ometer, MPH/km/h, Vehicle Info,Driver
Assist, Fuel Economy, Trip, Audio,
Stored Messages, and Screen Set Up).
• Push the DOWN
button to scroll
downward through the main menu and
submenus.
• Push the RIGHT
button to access
the information screens or sub-menu
screens of a main menu item.
• Push the BACK/LEFT
button to ac-
cess the information screens or sub-
menu screens of a main menu item.
• Push the
OK button to access/select the
information
screens
or
sub-menu
screens of a main menu item. Push and
hold the OK button for two seconds to reset displayed/selected features that can be
reset.
Compass Calibration
This compass is self-calibrating, which eliminates the need to set the compass manually.
When the vehicle is new, the compass may appear erratic and the DID will display “CAL”
until the compass is calibrated.
You may also calibrate the compass by completing one or more 360 degree turns (in an
area free from large metal or metallic objects) until the “CAL” message displayed in the
DID turns off. The compass will now function normally.
ECO
• The ECO message will appear in your DID display when the Fuel Saver Technology is
active and you are driving in a fuel efficient manner.
• This feature allows you to monitor when you are driving in a fuel efficient manner, and
it can be used to modify driving habits in order to increase fuel economy.
1 — DID Controls
E L E C T R O N I C S
143