Crosley Radio Performer CR2402A - Manual (Page 4)

42
43
6 9
Control Locators
Unit Controls
Remote Controls
40 Aux In Jack
41 Audio Output Jack
42 AC Power Cord
43 External antenna
44 Adapter For 45 rpm Records
45
46
47
48
49
51
53
50
55
57
54
59
58
52
56
POWER
EJECT
REPEAT
FIND
REC
ERASE
FINALIZE
1
4
7
0
2
5
8
10+
3
6
9
MUTE
BAND
MO/ST
TRACK
SPLIT
VOL -
EQ
PROGRAM
FUNCTION
VOL +
RANDOM
FOLDER
+
FOLDER -
61
62
64
63
65
66
67
68
69
70
60
41 40
Random Play
Programmed Playback
Repeat Playback
Playing a CD
1
While playing a CD, press the RANDOM button
(48) on the remote control. “Rand” will show on
the LCD display. The unit will randomly select
songs from the CD.
2
To cancel Random playback, press the
RANDOM button (48) again.
1
Make sure the CD is stopped.
2
Press the PROGRAM button (16/47). " 01" will
shown on the display.
3 Press the (11/64) or (8/52)buttons to
select a desired track.
4
Press the PROGRAM button (16/47) twice to
store the selected track number.
5
Repeat above steps 3 and 4 to program
additional tracks into memory.
NOTE: Maximum of 99 tracks can be programmed
into memory.
1
Press the FUNCTION button (4/68) to set the
unit to CD mode.
2
Press the EJECT button (18/46) to open the CD
drawer. Insert a CD into the tray with the label
side facing up.
3
Press the EJECT button (18/46) again to close
the CD drawer. The display will show “CD Load”
for a few seconds and playback will automatically
begin.
4
To skip forwards or backwards through the tracks
on a CD, press the (11/64) or (8/52) buttons.
5
To fast forward or rewind through a track, press
and hold the (11) or (8) buttons on the
control panel. Release the buttons once you
reach the desired position on the track. To use
the remote to fast forward or rewind, press the
(62) or (50) button one time. Once the
desired position is reached, press the button
again to resume play.
1
To repeat a single track, select the desired track
number and press the REPEAT button (49)
once. Press the PLAY button. "Repeat one" will
show on the display and the selected track will
repeat once it is finished.
2
To repeat a whole CD, press the REPEAT button
(49) twice. The display will show "Repeat All".
Once the disc is finished, it will start over again
from the beginning.
3
To turn off the repeat feature, press the REPEAT
button (49) again. The repeat display will
disappear from the LCD.
CD Operation
44
45 Power Button
46 Eject Button
47 Program Button
48 Random Button
49 Repeat Button
50 Tuning Down Button
51 Find Button
52 Backward Skip
53 Stop Button
54 Folder + Button
55 Record Button
56 Track Split Button
57 Erase Button
58 Band Button(AM/FM)
59 Finalize Button
60 0-9, 10+ Button
61 Mute Button
62 Tuning Up Button
63 Play/CD Pause Button
64 Forward Skip
65 Folder - Button
66 Mono/Stereo Button
67 EQ Button
68 Function Button
69 Volume Down
70 Volume Up