beautypg.com

Dodge 2015 Challenger - Owner Manual User Manual

Page 287

background image

Blind Spot Alert
When this feature is selected, the Blind Spot Alert feature

Provides alerts, visual and/or audible, to indicate objects

in your blind spot. The Blind Spot Alert feature can be

activated in “Lights” mode. When this mode is selected,

the Blind Spot Monitor (BSM) system is activated and

will only show a visual alert in the exterior mirrors.

When “Lights & Chime” mode is activated, the Blind

Spot Monitor (BSM) will show a visual alert in the

exterior mirrors as well as an audible alert when the turn

signal is on. When “Off” is selected, the Blind Spot

Monitor (BSM) system is deactivated. To change the

Blind Spot Alert status, press the “Off,” “Lights” or

“Lights & Chime” button on the touchscreen. Then press

the back arrow button on the touchscreen.
NOTE:

If your vehicle has experienced any damage in

the area where the sensor is located, even if the fascia is

not damaged, the sensor may have become misaligned.

Take your vehicle to an authorized dealer to verify sensor

alignment. Having a sensor that is misaligned will result

in the BSM not operating to specification.
ParkView® Backup Camera Active Guidelines
Your vehicle may be equipped with the ParkView® Rear

Back Up Camera Active Guidelines that allows you to see

active guidelines over the ParkView Back up camera

display whenever the shift lever is put into REVERSE.

The image will be displayed on the radio touchscreen

display along with a caution note to “check entire sur-

roundings” across the top of the screen. After five sec-

onds, this note will disappear. To make your selection,

press the “ParkView Backup Camera Active Guidelines”

button on the touchscreen, until a check-mark appears

next to setting, indicating that the setting had been

selected. Press the back arrow button on the touchscreen

to return to the previous menu.

4

UNDERSTANDING YOUR INSTRUMENT PANEL 285