Ram Trucks uconnect 5.0 for Chrysler - Manual (Page 24)

Making A Phone Call
1. Press the “Phone” button.
2. After the BEEP, say “dial” (or “call” a name).
Receiving A Call – Accept (And End)
1. When an incoming call rings or is announced on
Uconnect®, press the “Phone” button.
2. To end a call, press the “Phone” button on steering
wheel or the “Phone” soft-key on the radio screen.
Mute (Or Unmute) Microphone During Call
1. During a call, press the “Voice Command” button.
2. After the BEEP, say “mute” (or “mute off.”)
Transfer Ongoing Call Between Handset And
Vehicle
1. During a call, press the “Voice Command” button.
2. After the BEEP, say “transfer call.”
Changing The Volume
1. Start a dialogue by pressing the “Phone” button, then
adjust the volume during a normal call.
2. Use the radio Volume rotary knob to adjust the
volume to a comfortable level while the Uconnect®
system is speaking. Please note the volume setting for
Uconnect® phone is different than the audio system
volume setting.
4
Uconnect® Phone 23