beautypg.com

Using fob with integrated key (tip start), Keyless enter-n-go – Dodge 2014 Durango - Owner Manual User Manual

Page 409

background image

CAUTION!

Damage to the transmission may occur if the follow-
ing precautions are not observed:
Do not shift from REVERSE, PARK, or NEUTRAL

into any forward gear when the engine is above
idle speed.

Shift into PARK only after the vehicle has come to

a complete stop.

Shift into or out of REVERSE only after the vehicle

has come to a complete stop and the engine is at
idle speed.

Before shifting into any gear, make sure your foot

is firmly on the brake pedal.

Using Fob With Integrated Key (Tip Start)

NOTE:

Normal starting of either a cold or a warm

engine is obtained without pumping or pressing the
accelerator pedal.

Do not

press the accelerator. Use the Fob with Integrated

Key to briefly turn the ignition switch to the START
position and release it as soon as the starter engages. The
starter motor will continue to run, and it will disengage
automatically when the engine is running. If the engine
fails to start, the starter will disengage automatically in 10
seconds. If this occurs, turn the ignition switch to the
LOCK/OFF position, wait 10 to 15 seconds, then repeat
the “Normal Starting” procedure.

Keyless Enter-N-Go™

This feature allows the driver to oper-
ate the ignition switch with the push
of a button, as long as the Remote
Start/Keyless Enter-N-Go™ Key Fob
is in the passenger compartment.

5

STARTING AND OPERATING

407