beautypg.com

To vary the speed setting – Dodge 2014 Durango - Owner Manual User Manual

Page 208

background image

WARNING!

The Resume function should only be used if traffic
and road conditions permit. Resuming a set speed
that is too high or too low for prevailing traffic and
road conditions could cause the vehicle to accelerate
or decelerate too sharply for safe operation. Failure to
follow these warnings can result in a collision and
death or serious personal injury.

To Vary The Speed Setting

To Increase Speed

While ACC is set, you can increase the set speed by
pressing the SET + button.

The speed increment shown is dependant on the speed of
U.S. (mph) or Metric (km/h) units:

U.S. Speed (mph)

• Pressing the SET + button once will result in a 1 mph

increase in set speed. Each subsequent tap of the
button results in an increase of 1 mph.

• If the button is continually pressed, the set speed will

continue to increase in 5 mph increments until the
button is released. The increase in set speed is reflected
in the EVIC display.

Metric Speed (km/h)

• Pressing the SET + button once will result in a 1 km/h

increase in set speed. Each subsequent tap of the
button results in an increase of 1 km/h.

• If the button is continually pressed, the set speed will

continue to increase in 10 km/h increments until the
button is released. The increase in set speed is reflected
in the EVIC display.

206

UNDERSTANDING THE FEATURES OF YOUR VEHICLE