Accel/decel, Resume, Cancel – Dodge 2014 Charger - User Guide User Manual

Page 35: Operating your vehicle

Accel/Decel

To Increase Speed

• When the Electronic Speed Control is set, you can increase speed by pushing the RES +

button.

The speed increment shown is dependant on the speed of U.S. (mph) or Metric (km/h) units:

U.S. Speed (mph)

• Pressing the RES + button once will result in a 1 mph increase in set speed. Each

subsequent tap of the button results in an increase of 1 mph.

• If the button is continually pressed, the set speed will continue to increase until the

button is released, then the new set speed will be established.

Metric Speed (km/h)

• Pressing the RES + button once will result in a 2 km/h increase in set speed. Each

subsequent tap of the button results in an increase of 2 km/h.

• If the button is continually pressed, the set speed will continue to increase until the

button is released, then the new set speed will be established.

To Decrease Speed

• When the Electronic Speed Control is set, you can decrease speed by pushing the SET -

button.

The speed decrement shown is dependant on the speed of U.S. (mph) or Metric (km/h) units:

U.S. Speed (mph)

• Pressing the SET - button once will result in a 1 mph decrease in set speed. Each

subsequent tap of the button results in a decrease of 1 mph.

• If the button is continually pressed, the set speed will continue to decrease until the

button is released, then the new set speed will be established.

Metric Speed (km/h)

• Pressing the SET - button once will result in a 2 km/h decrease in set speed. Each

subsequent tap of the button results in a decrease of 2 km/h.

• If the button is continually pressed, the set speed will continue to decrease until the

button is released, then the new set speed will be established.

Resume

• To resume a previously selected set speed in memory, push the RES + button and

release.

Cancel

• Push the CANCEL button, or apply the brakes to cancel the set speed and maintain the

set speed memory.

• Push the ON/OFF button to turn the system off and erase the set speed memory.

OPERATING YOUR VEHICLE