High/low beam switch, Flash-to-pass, Front map/reading lights — if equipped – Dodge 2014 Charger-SRT - Owner Manual User Manual

Page 228

Text mode
Original mode

High/Low Beam Switch

Push the multifunction lever away from you to switch
the headlights to high beam. Pull the multifunction lever
toward you to switch the headlights back to low beam.

Flash-To-Pass

You can signal another vehicle with your headlights by
lightly pulling the multifunction lever toward you. This
will turn on the high beam headlights until the lever is
released.

NOTE:

If the multifunction lever is held in the flash-to

pass position for more than 15 seconds, the high beams
will shut off.

Front Map/Reading Lights — If Equipped

The front map/reading lights are mounted in the over-
head console.

Front Map/Reading Lights

226

UNDERSTANDING THE FEATURES OF YOUR VEHICLE