beautypg.com

Electronics – Dodge 2013 Journey - User Guide User Manual

Page 41

background image

Setting the Time

• Model 8.4N synchronizes time automatically via GPS, so should not require any time

adjustment. If you do need to set the time manually, follow the instructions below for
Model 8.4.

• For Model 8.4, turn the unit on, then touch the time display at the top of the screen. Touch

Yes.

• If the time is not displayed at the top of the screen, touch More soft-key and then Settings

soft-key. In the Settings screen, touch the Clock soft-key, then check or uncheck this
option.

• Touch + or – next to Set Time Hours and Set Time Minutes to adjust the time.

• If these features are not available, uncheck the Sync with GPS box.

• Touch X to save your settings and exit out of the Clock Setting screen.

Audio Settings

• Touch the Audio soft-key to activate the Audio settings screen to adjust Balance\Fade,

Equalizer, and Speed Adjusted Volume.

• You can return to the Radio screen by touching the X located at the top right.

Balance/Fade

• Touch the Balance/Fade soft-key to Balance audio between the front speakers or fade

the audio between the rear and front speakers.

• Touching the Front, Rear, Left, or Right soft-keys or touch and drag the red Speaker Icon

to adjust the Balance/Fade.

Equalizer

• Touch the Equalizer soft-key to activate the Equalizer screen.

• Touch the + or - soft-keys, or by touching and dragging over the level bar for each of the

equalizer bands. The level value, which spans between ±9, is displayed at the bottom of
each of the Bands.

Speed Adjusted Volume

• Touch the Speed Adjusted Volume soft-key to activate the Speed Adjusted Volume

screen. The Speed Adjusted Volume is adjusted by touching the + and - buttons or by
touching and dragging over the level bar. This alters the automatic adjustment of the
audio volume with variation to vehicle speed.

ELECTRONICS

39