Ram Trucks UCONNECT 430 for Chrysler - Manual (Page 79)

The radio screen will revert back to the last tuner mode
when the cable is unplugged.
To change radio modes while the cable is connected to
the unit, press the MEDIA hard-key to display the AUX
tab. Touch the AUX tab to return to the AUX mode.
Adjust the volume with the ON/OFF VOLUME rotary
knob or with the volume of the attached device.
The control of the external device (e.g., selecting playlists,
play, fast forward, etc.) cannot be provided by the radio;
use the device controls instead.
NOTE: Inserting of a mono jack will result in improper
audio playback.
USB Port (If Equipped)
The USB Port in the center console or upper glove box
(depending on the vehicle) gives you access to the audio
files on the external iPod
௡ or USB device through the
AUX Mode. It functions as a remote control for the
currently connected audio devices mobile digital device,
and you can play audio from the audio device through
the vehicle’s speaker system.
Before using the AUX mode, you will need to connect
your audio device to the USB port. (See the UNIVERSAL
CUSTOMER INTERFACE (UCI) 1.0 section in your vehi-
cle’s Owner’s Manual on the DVD or the iPod
௡ Control
section in your User Guide for instructions.)
NOTE: The files will not be stored on the internal hard
disk drive and cannot be used in the HDD mode.
NOTE: It is recommended you use the latest available
software for your iPod ௡ and iTunes.
See the manufacturer’s website for updates:
http://www.apple.com/support/ipod/.
1
Uconnect ா 430/430N 77