Sending audio/video and controlling the ves – Ram Trucks UCONNECT 430 for Chrysler User Manual
Page 69
Availability of the DVD Player soft-key, the Rear AUX 1
soft-key, and the Rear AUX 2 is based on the type of
VES™ in the vehicle.
DVD Player is not available if there is no DVD player in
the VES™ or there is no DVD in the player.
A device must be plugged into the AUX jack of the VES™
to be available.
A disabled soft-key indicates an unavailable source.
Sending Audio/Video and controlling the VES™
The radio can also control the VES™.
All sources are played through the VES™ headphones.
Refer to the Uconnect
Multimedia/VES™ section of the
Owner’s Manual on the DVD for additional details.
To access the rear VES™, press the MENU hard-key on
the right side of the radio.
Touch the Rear VES soft-key to display the Rear VES
Controls.
The Rear VES Controls are displayed on the right half of
the screen.
NOTE:
Press the HIDE LIST soft-key and/or the CLOSE
INFO soft-key, if you cannot see the Rear VES Controls.
The first column controls VES on/off and the headset
audio channels 1 or 2.
A VES™ headset can listen to either audio Channel 1 or
audio Channel 2.
Touch the soft-key tab 1 to select Channel 1.
The left half of the screen displays the audio source
information which, if FM was chosen for example, a
radio frequency such as 93.1 MHz would be displayed.
1
Uconnect
ா
430/430N
67