Dodge 2012 Journey - User Guide - Manual (Page 53)

• The iPod ® battery charges when plugged into the USB port (if supported by the
specific device).
• To route the USB/iPod ® cable out of the center console, use the access cut out in
the front of the console.
NOTE:
• When connecting your iPod
® device for
the first time, the system may take
several minutes to read your music,
depending on the number of files. For
example, the system will take
approximately 5 minutes for every 1000
songs loaded on the device. Also during
the reading process, the Shuffle and
Browse functions will be disabled. This
process is needed to ensure the full use
of your iPod
® features and only happens
the first time it is connected. After the first time, the reading process of your iPod ®
will take considerably less time unless changes are made or new songs are added to
the playlist.
• The USB port supports certain Mini, Classic, Nano, Touch, and iPhone ® devices. The
USB port also supports playing music from compatible external USB Mass Storage
Class memory devices. Some iPod
® software versions may not fully support the USB
port features. Please visit Apple’s website for iPod ® software updates.
3. SD Card (8.4 & 8.4N Only)
• Play songs stored on an SD card inserted into the SD card slot.
• Song playback can be controlled using the radio or Steering Wheel Audio Controls
to play, skip to the next or previous track, browse, and list the contents.
4. Bluetooth® Streaming Audio
• If equipped with Uconnect™ Voice Command, your Bluetooth-equipped iPod ®
devices, cell phones or other media players, may also be able to stream music to
your vehicle's sound system. Your connected device must be Bluetooth-compatible,
and paired with your Uconnect Touch
® system (see Uconnect™ Phone for pairing
instructions). You can access the music from your connected Bluetooth ® device by
touching the Source soft-key while in Player mode.
Uconnect™ Phone (Bluetooth ® HANDS FREE
CALLING)
• If the Uconnect™ Phone Button exists on your steering wheel, then you have
the Uconnect™ Phone features.
• The Uconnect™ Phone is a voice-activated, hands-free, in-vehicle communications
system with Voice Command Capability (see Voice Command section).
• The Uconnect™ Phone allows you to dial a phone number with your mobile phone
using simple voice commands or using screen soft-keys.
ELECTRONICS
51