beautypg.com

Dodge 2012 Journey - Owner Manual User Manual

Page 268

background image

To Move The Cross Rails

1. Loosen the knobs on top of each cross rail approxi-
mately six turns to disengage the clamp tooth from the
side rail.

2. Relocate the cross rails, aligning the cross rail stan-
chions (end pieces) with one of the vertical marks on the
outboard surface of the side rail for proper positioning.
There are four frontward marks for the front cross rail
and four rearward marks for the rear cross rail. Make
sure the cross rails remain equally spaced or parallel at
any position for proper function.

3. Tighten the knobs on each cross rail to lock it in
position. As you tighten the knob, make sure the clamp
tooth engages completely into the side rail slot.

4. Attempt to move the cross rail to ensure that it is
locked in position.

Roof Luggage Rack

266

UNDERSTANDING THE FEATURES OF YOUR VEHICLE