Programming a rolling code – Dodge 2012 Grand_Caravan - Owner Manual User Manual
Page 237
Programming A Rolling Code
For programming garage door openers that were manu-
factured after 1995. These garage door openers can be
identified by the “LEARN” or “TRAIN” button located
where the hanging antenna is attached to the garage door
opener. It is NOT the button that is normally used to
open and close the door. The name and color of the
button may vary by manufacturer.
1. Turn the ignition switch to the ON/RUN position.
2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm)
away from the HomeLink
button you wish to program
while keeping the HomeLink
indicator light in view.
Training The Garage Door Opener
1 — Door Opener
2 — Training Button
234
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
This manual is related to the following products: