beautypg.com

Lap/shoulder belt untwisting procedure – Dodge 2012 Charger_SRT - Owner Manual User Manual

Page 52

background image

above the webbing to release the anchorage, then move it
up or down to the position that fits you best.

As a guide, if you are shorter than average you will
prefer a lower position, and if you are taller than average

you will prefer a higher position. When you release the
anchorage try to move it up and down to make sure that
it is locked in position.

In the rear seat, move toward the center of the seat to
position the belt away from your neck.

Lap/Shoulder Belt Untwisting Procedure

Use the following procedure to untwist a twisted lap/
shoulder belt.

1. Position the latch plate as close as possible to the
anchor point.

2. At about 6 to 12 in (15 to 30 cm) above the latch plate,
grasp and twist the belt webbing 180 degrees to create a
fold that begins immediately above the latch plate.

3. Slide the latch plate upward over the folded webbing.
The folded webbing must enter the slot at the top of the
latch plate.

Adjusting Upper Shoulder Belt

50

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE