beautypg.com

Linking and unlinking the remote keyless, Entry transmitter to memory – Dodge 2012 Charger_SRT - Owner Manual User Manual

Page 199

background image

NOTE:

• Memory profiles can be set without the vehicle in

PARK, but the vehicle must be in PARK to recall a
memory profile.

• The Recall Memory with Remote Key Unlock feature

can be turned on and off using the Uconnect Touch™
System, refer to “Uconnect Touch™ Settings” in “Un-
derstanding Your Instrument Panel” for further
information.

Linking And Unlinking The Remote Keyless Entry
Transmitter To Memory

Your RKE transmitters can be programmed to recall one
of two pre-programmed memory profiles by pressing the
UNLOCK button on the RKE transmitter.

To program your RKE transmitters, perform the follow-
ing:

1. Remove the Key Fob from the ignition (or change the
ignition to OFF, for vehicles equipped with Keyless
Enter-N-Go).

2. Select desired memory profile 1 or 2.

3. Once the profile has been recalled, press and release
the SET (S) button on the memory switch, then press and
release the side of the rocker switch labeled 1 or 2
accordingly. “Memory Profile Set” (1 or 2) will display in
the instrument cluster on vehicles equipped with the
EVIC.

4. Press and release the LOCK button on the RKE
transmitter within 10 seconds.

NOTE:

Your RKE transmitters can be unlinked to your

memory settings by pressing the SET (S) button followed
by the UNLOCK button on the RKE transmitter in Step 4
above.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

197