Dodge 2012 Avenger - User Guide - Manual (Page 74)

Jacking Instructions
1. Remove the scissors jack and lug
wrench from the spare wheel as an
assembly. Turn the jack screw to the
left to loosen the lug wrench, and
remove the wrench from the jack
assembly.
NOTE: The jack handle attaches to the side
of the jack with two attachment points.
When the jack is partially expanded, the
tension between the two attachment
points holds the jack handle in place.
2. Loosen, but do not remove, the wheel
nuts by turning them to the left one
turn while the wheel is still on the
ground.
3. There is a front and rear jacking
location on each side of the vehicle.
WHAT TO DO IN EMERGENCIES
72