Shift lever override, Towing a disabled vehicle, What to do in emergencies – Dodge 2011 Caliber - User Guide User Manual

Page 57

WARNING!

(Continued)

• Do not connect the cable to the negative post (-) of the discharged battery.

The resulting electrical spark could cause the battery to explode and could
result in personal injury.

SHIFT LEVER OVERRIDE

• If a malfunction occurs and the shift

lever cannot be moved out of the PARK
position, you can use the following
procedure to temporarily move the shift
lever:

• To access the shift lever override,

locate and remove the removable
plug in the right side of the shift
lever housing.

• Firmly set the parking brake.

• Turn the ignition switch to the ACC

or ON position without starting the
engine.

• Press and maintain firm pressure on

the brake pedal.

• Using a screwdriver or similar tool, press and hold the override tab through the

access port on the center console.

• Move the shift lever into the NEUTRAL position.

• The vehicle may then be started in NEUTRAL.

• Reinstall the override cover.

WHAT TO DO IN EMERGENCIES