Dodge 2011 Caliber - Owner Manual - Manual (Page 263)

NOTE:
• If the radio has a USB port, refer to the appropriate
Uconnect Multimedia radio user’s manual for iPod or
external USB device support capability.
• Connecting an iPod௡ to the AUX port located in the
radio faceplate, plays media, but does not use the
iPod
௡ control feature to control the connected device.
Connecting The iPod
ா
Use the provided connection cable to connect an iPod ௡ to
the vehicle’s 16–pin connector port (which is located in
the glove compartment on some vehicles). Once the
iPod
௡ is connected and synchronized to the vehicle’s
iPod ௡ control system (iPod௡ may take a few seconds to
connect), the iPod
௡ starts charging and is ready for use
by pressing radio switches, as described below.
NOTE:
• It may be necessary to remove the connector pin
protection cap from the 16–pin connector port, prior to
connecting the cable.
• If the iPod௡ battery is completely discharged, it may
not communicate with the iPod ௡ control system until
a minimum charge is attained. Leaving the iPod
௡
connected to the iPod ௡ control system may charge it to
the required level.
Using This Feature
By using the provided connection cable to connect an
iPod
௡ to the vehicle’s iPod௡ control 16–pin connector port:
• The iPod௡ audio can be played on the vehicle’s sound
system, providing metadata (artist, track title, album,
etc.) information on the radio display.
• The iPod௡ can be controlled using the radio buttons to
Play, Browse, and List the iPod ௡ contents.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 261