Dodge 2010 Caliber - Quick Reference Guide - Manual (Page 34)

UNIVERSAL CONSUMER INTERFACE
• This feature allows you to plug an iPod ®
into the vehicle’s sound system through a
16–pin connector using the provided
interface cable.
• The 16–pin connector port is located in the
glove box or on the center console. Location
may vary. To get into the UCI (iPod
® ) mode
from a non-touch-screen radio, press the
AUX button on the radio faceplate. From
touch-screen radios, press the MEDIA
hard-key, then touch the iPod
® soft-key.
When connected to this feature:
• The iPod ® audio can be played on the vehicle’s sound system.
• The iPod ® can be controlled using the radio buttons to Play, Browse, and List the
iPod ® contents. Refer to the Owner's Manual on the DVD for details.
• The iPod ® battery charges when plugged into the UCI connector.
WARNING!
Do not plug in or remove the iPod ® while driving. Failure to follow this warning could
result in an accident.
ELECTRONIC VEHICLE INFORMATION CENTER (EVIC)
• The EVIC features a driver interactive
display that is located in the instrument
cluster. For additional information, refer to
Programmable Features in this guide.
• Press the EVIC button, located below the
speedometer, until one of the following
functions is displayed on the EVIC:
• Compass/Temperature/Audio
• Average Fuel Economy
• Distance To Empty (DTE)
• Elapsed Time
• Tire Pressure Monitor (TPM)
• Personal Settings
• Pressing and holding the EVIC button once will clear the function currently being
displayed.
• To reset all resettable functions, press and release the EVIC button a second time
within three seconds of resetting the currently displayed function. Reset ALL will be
displayed during this three-second window.
ELECTRONICS
32