Kraus KTM25 - Manual (Page 3)

VERSION 1.1
Top mount sink installation
2
. Cut along the top-mount line.
1
. Verify cabinet clearance.
3
. Insert the clips into the channels.
Wipe away any
excess sealant.
6.
Insert the sink.
A
Tighten to secure sink.
C
Rotate the clip.
B
4
. Drill pilot hole and then cut the countertop opening.
(must be done by professional)
5
. Verify fit. Adjust cutout if needed.
7
. Apply silicone sealant.
8
. Install the strainer(s).
(bottom view)
CHANNEL
MOUNTING
CLAMP
SINK FASTENER
COUNTERTOP
SILICONE CAULK
(NOT FURNISHED)
A
B
KTM SERIES
KTM-24 | KTM-25 | KTM-32 | KTM-33