Kraus C-KCV-150-14601 - Manual (Page 2)

1 3/8’’ O
4
3
1
2
3
4
5
6
7
2
1 Faucet body
Waterlines
Fixing bolt
O-ring
Rubber washer
Brass washer
Fixing nut 1.
2.
3.
4.
5.
6.
7.
Replacement Parts
Keep this manual for ordering replacement parts.
Trouble - Shooting
Problem Cause Action
Leaks underneath handle
Aerator leaks or has an inconsistent
water flow pattern.
Water will not shut off completely.
Adjusting ring or cap has come loose.
Aerator is dirty or misfitted.
Dirty or worn out plastic washer in the
cartridge.
Tighten the adjusting ring or cap.
Unscrew the aerator to check rubber packing
or replace the aerator.
Remove handle and cartridge to check if ceramic
disk is damage permanently or dirty.
Re-install cartridge.
Contact Us Toll-Free at 1-800-775-0703; or visit our website at www.kraususa.com 2008-2011 Kraus USA Inc.
Installation
Contact Us Toll-Free at 1-800-775-0703; or visit our website at www.kraususa.com 2008-2011 Kraus USA Inc.
Screw waterlines 2 into the inlet pipe of faucet body 1.
Fit O-ring 4 into the bottom groove of faucet body 1.
After, screw the fixing bolt 3 into the corresponding
screw-hole of faucet body 1.
Insert waterlines 2 and fixing bolt 3 through the drilled hole
1 3/8’’ of the countertop. Put rubber washer 5 and brass
washer 6 onto the fixing bolt, screwing in the nut 7. Then
place faucet body 1 correctly and securely tighten nut 7.