Cruise control – NISSAN 2012 Xterra - Quick Reference Guide User Manual

Page 11

CruisE Control

The cruise control system enables you to set a constant
cruising speed once the vehicle has reached 25 mph.

The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.

To activate the cruise control, push the ON•OFF
switch

. The CruisE indicator light in the

instrument panel will illuminate.

To set cruising speed, accelerate the vehicle to the
desired speed, push the Coast/sEt switch

and release. The sEt indicator light in the instrument panel will illuminate. Take your foot off

the accelerator pedal. Your vehicle will maintain the set speed.

To reset at a faster cruising speed, push and hold the aCCEl/rEs switch

. When the

vehicle attains the desired speed, release the switch.

To reset at a slower cruising speed, push and hold the Coast/sEt switch

. Release

the switch when the vehicle slows to the desired speed.

To cancel the preset speed, tap the brake pedal or push the CanCEl switch

To turn off cruise control, push the ON•OFF switch

. Both the CruisE

indicator light and sEt indicator light in the instrument panel will turn off.

for more information, refer to the “starting and driving (section 5)” of your Owner’s Manual.

To view detailed instructional videos regarding these and other features,

please go to www.nissanownersinfo.mobi.

sEEK/traCK Button

To scan quickly through each broadcasting station, press the sEEK/traCK button.

To skip from one track to another on a cd, press the sEEK/traCK button. Each

time the button is pressed, the CD will advance or skip back one track.

station anD CD sElECt Buttons

Eighteen stations can be set in any combination of FM, AM and XM

satellite radio stations.

To store a station in a preset you must first select the A, B, or C memory bank by pressing

the PrEsEt a·B·C button

Then tune to the desired fM, AM or XM station.

Next press and hold the desired station select button (1-6) for at least 2 seconds. When

the preset indicator illuminates, a beep will sound, indicating memorization is complete.

To retrieve a previously set station, select the memory bank where the preset was set,

then press the corresponding station select button (1-6).

While playing a cd, to select a different cd loaded into the cd changer, press one

of the CD select buttons (1-6).

for more information, refer to the “Heater, air conditioner, audio and phone systems (section 4)” of your Owner’s Manual.