CDA RV 1000 - Manual (Page 29)

29
Oven doors - removing
the inner pane of glass
The inner pane of glass can easily be
removed for cleaning.
Removing the inner pane
– Open the door to the full extent.
– Gently pull out the inner pane of glass
(Fig. 19a).
– Clean the glass with an appropriate
cleaner.
– Dry thoroughly, and place the pane on
a soft surface.
– Now you can also clean the inside of
the outer glass.
Do not use harsh abrasive cleaners or
sharp metal scrapers to clean the
panes of glass since they can scratch
the surface, which may result in shat-
tering of the glass.
Reassembling the inner
pane
– Check the correct positioning of the
no.4 (four) silicon rubbers D (fig. 19b).
– Check that you are holding the pane
the correct way. You should be able to
read the wording on it as it faces you.
– Insert the inner pane in the left E and
right F side guides (fig. 19c) and gently
let it slide up to the retainers H (fig.
19d).
Fig. 19a
D
Fig. 19b
Fig. 19c
E
F
H
Fig. 19d
It is normal the opened gap between the
top edge of the inner glass and the top of
the door. This allows the cooling air
circulation.