NISSAN 2015 Titan - Quick Reference Guide - Manual (Page 10)

To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi. 8
FIRST DRIVE FEATURES
HEADLIGHT CONTROL SWITCH
HEADLIGHT CONTROL
Turn the headlight control switch to the
position 1
to turn on the front parking, tail, license
plate and instrument panel lights. Turn the switch to
the position
2
to turn on the headlights.
AUTOLIGHT SYSTEM (if so equipped)
The autolight system will automatically turn the
headlights on when it is dark and off when it is light. The system will keep the headlights
on for a period of time after you turn the ignition off and all doors are closed.
To activate the autolight system, turn the headlight control switch to the AUTO position
3
then turn the ignition switch to ON. To deactivate the autolight system, turn the
headlight control switch to the OFF, position 1
or position
2 .
HIGH BEAM SELECT
Push the headlight control switch forward
4
to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull
the headlight switch back to the original position
to select the low beam. The blue indicator light
will extinguish.
Pull and release the headlight control switch 5
to
flash the headlight high beams on and off.
FOG LIGHT SWITCH (if so equipped)
The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the position
6
to turn the fog lights on.
Turn the switch (inside collar) to the OFF position
to turn the fog lights off.
LANE CHANGE SIGNAL
Move the lever up or down until the turn signal begins to flash, but the lever does not
latch, to signal a lane change. Hold the lever until the lane change is completed.
Move the lever up or down until the turn signal begins to flash, but the lever does not
latch, and release the lever. The turn signal will automatically flash 3 times.
Choose the appropriate method to signal a lane change based on the road and
traffic conditions.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
4
5
6
1
3
2
1705375_15a_Titan_QRG_NAM_091914.indd 8 9/19/14 9:49 AM