NISSAN 2013 Titan - Owner's Manual - Manual (Page 167)

Connecting the rear camera (if so
equipped)
Before closing the tailgate reconnect the rear
camera by performing the following: :
1. After attaching the rear tailgate to the truck,
keep the tailgate open and check that the
tailgate harness is not hanging below the
tailgate.
2. Remove the connector bracket
᭺
2 from the
sill by pressing the locking tab inward, in the
direction shown, while pulling the bracket
apart.
3. Disconnect the chassis plug and bracket
from the chassis wiring harness
᭺
3 . Keep
the connector and bracket in a safe place
such as the glove box.
4. Disconnect the tailgate plug from the tail-
gate wiring harness. Keep the tailgate plug
in a safe place such as the glove box.
5. Connect the tailgate wiring harness to the
chassis wiring harness.
6. Securely fix the rear camera connector
bracket
᭺
1 to the rear sill.
7. Close the tailgate securely.
Locking the tailgate
To unlock the tailgate, turn the key toward the
passenger side of the vehicle
᭺
1 . To lock, turn the
key toward the driver side
᭺
2 .
Both the master key and the valet key can be
used to lock and unlock the tailgate.
LPD2097 LPD0272
3-24 Pre-driving checks and adjustments