NISSAN 2012 Titan - Quick Reference Guide - Manual (Page 8)

WinDshiElD WiPEr/WashEr sWitCh
Move the lever to the following positions to operate
the windshield wipers:
01
Mist (mist) - One sweep operation of the
wipers.
02
intermittent (int) - Wipers operate
intermittently. The intermittent speed can be
adjusted by twisting the time control ring
03 .
04
Low (lo) - Wipers operate at a continuous
low-speed.
05
High (hi) - Wipers operate at a continuous
high-speed.
06
Pull the lever toward you to activate the washer.
The wipers will operate several times.
for more information, refer to the “instruments and controls (section 2)”
of your Owner’s Manual.
6
first drive features
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
HiGH BeAM SeLecT
Push the headlight control switch forward 04
to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull
the headlight switch back to the original position
to select the low beam. The blue indicator light
goes off.
Pull and release the headlight control switch 05
to flash the headlight high beams on and off.
fOG LiGHT SWiTcH (if so equipped)
nOTe: The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the position 06
to turn the fog lights on.
Turn the switch (inside collar) to the off position to
turn the fog lights off.
for more information, refer to the “instruments and controls (section 2)” of your Owner’s Manual.
04
05
06
06
01
02
04
05
mist
off
int
lo
hi
03