Cruise control (if so equipped) – NISSAN 2012 Titan - Quick Reference Guide User Manual

Page 11

CruisE Control (if so equipped)

The cruise control system enables you to set a constant
cruising speed once the vehicle has reached 25 mph.

The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.

To activate the cruise control, push the ON•OFF
switch

. The CruisE indicator light in the

vehicle information display will illuminate.

To set cruising speed, accelerate the vehicle to the desired speed, push the COAST•SET
switch

and release. The sEt indicator light in the vehicle information display will illuminate.

Take your foot off the accelerator pedal. Your vehicle will maintain the set speed.

To reset at a faster cruising speed, push and hold the ACCEL•RES switch

. When the

vehicle attains the desired speed, release the switch.

To reset at a slower cruising speed, push and hold the COAST•SET switch

. Release

the switch when the vehicle slows to the desired speed.

To cancel the preset speed, tap the brake pedal or push the CanCEl switch

To turn off cruise control, push the ON•OFF switch

. Both the CruisE

indicator light and sEt indicator light in the vehicle information display will turn off.

for more information, refer to the “starting and driving (section 5)” of your Owner’s Manual.

To view detailed instructional videos regarding these and other features,

please go to www.nissanownersinfo.mobi.

auDio/tunE/traCk knoB

To manually tune the radio, turn the auDio/tunE/traCk knob left or right.

sEEk/traCk Button

To scan quickly through each broadcasting station, press the sEEk/traCk button.

To skip from one track to another on a cd, press the sEEk/traCk button.

station anD CD sElECt Buttons

eighteen stations can be set in any combination of fM, AM and XM satellite radio stations.

To store a station in a preset you must first select the A, B or c memory bank by pressing the
PrEsEt a·B·C button

, then tune to the desired fM, AM or XM

station.

now press and hold the desired station select button (1-6) for at least 2 seconds. When
the preset indicator illuminates, a beep will sound, indicating memorization is complete.
To retrieve a previously set station, select the memory bank where the preset was set, then
press the corresponding station select button (1-6).

While playing a cd, to select a different cd loaded into the cd changer, press one of the

cd select buttons (1-6).

for more information, refer to the “Display screen, heater, air conditioner, audio and phone systems (section 4)” of your
Owner’s Manual.