NISSAN 2012 Rogue - Owner's Manual - Manual (Page 186)

Air flow control:
Turn the air flow control dial to change the air
flow mode.
— Air flows from the center and side ventila-
tors with maximum cooling (air condition-
ing). (The air recirculation
and A/C will
be automatically turned on.)
— Air flows from the center and side ventila-
tors.
— Air flows from the center and side ventila-
tors and foot outlets.
— Air flows mainly from the foot outlets.
— Air flows from the defroster and foot outlets.
— Air flows mainly from the defroster outlets.
. You can also select the middle position
between and or between and
.
. When the , or position is
selected, the air recirculation mode
cannot be turned on to prevent the windows
from being fogged up.
Fan speed control:
Turn the fan speed control dial clockwise
(HI) to increase the fan speed.
Turn the fan speed control dial counter-
clockwise (LO) to decrease the fan speed.
A/C (Air Conditioner) operation:
Push the A/C button to turn on or off the air
conditioner. When the air conditioner is on, the
A/C indicator light on the button illuminates.
Temperature control:
Turn the temperature control dial to set the
desired temperature. Turn the dial between the
middle and the right position to select the hot
temperature. Turn the dial between the middle
and the left position to select the cool tempera-
ture.
Heater operation
Heating:
This mode is used to direct heated air to the foot
outlets.
1. Push the air recirculation button to the
OFF position. (The indicator light turns off.)
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control dial to the
desired position.
4. Turn the temperature control dial to the
desired position between the middle and the
hot (right) position.
Ventilation:
This mode directs outside air to the side and
center ventilators.
1. Push the air recirculation button to the
OFF position. (The indicator light turns off.)
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control dial to the
desired position.
4. Turn the temperature control dial to the
desired position.
Defrosting or defogging:
This mode directs the air to the defroster outlets
to defrost/defog the windows.
1. Turn the air flow control dial to the
position.
2. Turn the fan speed control dial to the
desired position.
3. Turn the temperature control dial to the
desired position between the middle and the
hot (right) position.
. To remove frost from the outside surface of
the windshield quickly, turn the temperature
control dial to the maximum hot position and
the fan speed control
dial to maximum
(HI) position.
. If it is difficult to defog the windshield, turn
the A/C button on.
Center display, heater, air conditioner, audio, phone and voice recognition systems 4-25
Air flow control:
Turn the air flow control dial to change the air
flow mode.
— Air flows from the center and side ventila-
tors with maximum cooling (air condition-
ing). (The air recirculation
and A/C will
be automatically turned on.)
— Air flows from the center and side ventila-
tors.
— Air flows from the center and side ventila-
tors and foot outlets.
— Air flows mainly from the foot outlets.
— Air flows from the defroster and foot outlets.
— Air flows mainly from the defroster outlets.
. You can also select the middle position
between and or between and
.
. When the , or position is
selected, the air recirculation mode
cannot be turned on to prevent the windows
from being fogged up.
Fan speed control:
Turn the fan speed control dial clockwise
(HI) to increase the fan speed.
Turn the fan speed control dial counter-
clockwise (LO) to decrease the fan speed.
A/C (Air Conditioner) operation:
Push the A/C button to turn on or off the air
conditioner. When the air conditioner is on, the
A/C indicator light on the button illuminates.
Temperature control:
Turn the temperature control dial to set the
desired temperature. Turn the dial between the
middle and the right position to select the hot
temperature. Turn the dial between the middle
and the left position to select the cool tempera-
ture.
Heater operation
Heating:
This mode is used to direct heated air to the foot
outlets.
1. Push the air recirculation button to the
OFF position. (The indicator light turns off.)
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control dial to the
desired position.
4. Turn the temperature control dial to the
desired position between the middle and the
hot (right) position.
Ventilation:
This mode directs outside air to the side and
center ventilators.
1. Push the air recirculation button to the
OFF position. (The indicator light turns off.)
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control dial to the
desired position.
4. Turn the temperature control dial to the
desired position.
Defrosting or defogging:
This mode directs the air to the defroster outlets
to defrost/defog the windows.
1. Turn the air flow control dial to the
position.
2. Turn the fan speed control dial to the
desired position.
3. Turn the temperature control dial to the
desired position between the middle and the
hot (right) position.
. To remove frost from the outside surface of
the windshield quickly, turn the temperature
control dial to the maximum hot position and
the fan speed control
dial to maximum
(HI) position.
. If it is difficult to defog the windshield, turn
the A/C button on.
Center display, heater, air conditioner, audio, phone and voice recognition systems 4-25