NISSAN 2013 Rogue - Owner's Manual User Manual
Page 96

Black plate (94,1)
[ Edit: 2012/ 5/ 18 Model: S35-D ]
2-24
Instruments and controls
On or Off.
.
[24/12 Hr]
Select this submenu to set the 12h/24h time
display mode.
To return to the top page of the setting mode,
select “BACK”.
The time display may be different from the one
on the audio display.
Units:
The units can be set for the following items on
this menu.
.
Temperature
.
Distance/Fuel
To return to the top page of the setting mode,
select “BACK”.
Maintenance:
The maintenance intervals of the following items
can be set or reset for the reminders.
.
SERVICE
Select this submenu to set or reset the
distance for service due.
.
TIRE
Select this submenu to set or reset the
distance for replacing tires.
.
OTHER
Select this submenu and set or reset the
distance for items other than service or tires.
To return to the top page of the setting mode,
select “BACK”.
Alarms:
Alarms menu can be set to notify the following
items.
.
Driver alert
Select this submenu to set the driver alert
period.
.
Outside temp
Select this submenu to turn ON or OFF the
low outside temperature warning features.
For a description of the low outside tem-
perature warning features when Outside
Temp is set to ON, see “Outside air
temperature” earlier in this section.
With Outside Temp set to OFF,
— The outside temperature display remains
on steady at all outside temperatures and
does not flash.
— The low outside temperature warning
indicator does not appear.
To return to the top page of the setting mode,
select “BACK”.
Language:
Select the submenu to set the desired language
of the display.
Factory:
Select the submenu to reset the factory settings
of the display.
NOTE:
When resetting Factory, all previous set-
tings made are changed to default.
To return to the top page of the setting mode,
select “BACK”.
CONTINUOUSLY VARIABLE TRANS-
MISSION (CVT) POSITION INDICATOR
The Continuously Variable Transmission (CVT)
position indicator indicates the selector lever
position when the ignition switch is in the ON
position.