Tire labeling -34 – NISSAN 2013 Rogue - Owner's Manual User Manual
Page 326
Black plate (324,1)
[ Edit: 2012/ 5/ 18 Model: S35-D ]
8-34
Maintenance and do-it-yourself
REAR
ORIGINAL
TIRE
P215/70-
R16 99H
230 kPa,
33 PSI
P225/60-
R17 98H
230 kPa,
33 PSI
P225/55-
R18 97V
230 kPa,
33 PSI*1
260 kPa,
38 PSI*2
SPARE
TIRE
Original tire
230 kPa,
33 PSI
260 kPa,
38 PSI*3
T155/90-
D16
420 kPa,
60 PSI
*1:
2WD models
*2:
AWD models
*3:
AWD models with 18 inch tires
SDI1575
Example
TIRE LABELING
Federal law requires tire manufacturers to
place standardized information on the side-
wall of all tires. This information identifies
and describes the fundamental character-
istics of the tire and also provides the tire
identification number (TIN) for safety stan-
dard certification. The TIN can be used to
identify the tire in case of a recall.
SDI1606
Example
*
1
Tire size (example: P215/60R16 94H)
1. P: The “P” indicates the tire is designed
for passenger vehicles. (Not all tires
have this information.)
2. Three-digit number (215): This number
gives the width in millimeters of the tire
from sidewall edge to sidewall edge.
3. Two-digit number (60): This number,
known as the aspect ratio, gives the
tire’s ratio of height to width.
4. R: The “R” stands for radial.
5. Two-digit number (16): This number is
the wheel or rim diameter in inches.