NISSAN 2015 Quest - Owner's Manual - Manual (Page 330)

Reading a received text message:
1. Push the button.
2. Say “Messaging”.
3. Say “Read Text”.
The text message, sender and delivery time are
shown on the screen. Use the tuning switch on
the steering wheel to scroll through all text
messages if more than one are available. Push
the
button to exit the text message screen.
Push the button to access the following
options for replying to the text message:
. Call Back
Speak this command to call the sender of
the text message using the Bluetooth
Š
Hands-Free Phone System.
. Send Text
Speak this command to send a text mes-
sage response to the sender of the text
message.
. Read Text
Speak this command to read the text
message again.
. Previous Text
Speak this command to move to the
previous text message (if available).
. Next Text
Speak this command to move to the next
text message (if available).
NOTE:
Text messages are only displayed if the
vehicle speed is less than 5 MPH (8 km/h).
Bluetooth
Š
settings
To access and adjust the settings for the
Bluetooth
Š Hands-Free Phone System:
1. Push the SETTING button.
2. Use the TUNE·FOLDER knob to select
“Bluetooth” and then push the ENTER/
SETTING button:
. Bluetooth
Select “On” or “Off” to turn the vehicle’s
Bluetooth
Š
system on or off.
. Add Phone
To connect a phone to the system, see
“Initialization” (P.4-142).
. Delete Phone
Select to delete a phone from the
displayed list. The system will ask to
confirm before deleting the phone.
. Replace Phone
Select to replace a phone from the
displayed list. When a selection is made,
the system will ask to confirm before
proceeding. The recorded phonebook for
the phone being deleted will be saved as
long as the new phone’s phonebook is
the same as the old phone’s phonebook.
. Select Phone
Select to connect to a previously con-
nected phone from the displayed list.
. Phonebook Download
Select to turn on or off the automatic
download of a connected phone’s pho-
nebook.
. Show Incoming Calls
Select “Driver Only” to have incoming
call information displayed only in the
vehicle information display. Select “Both”
to have incoming call information dis-
played in both the vehicle information
display and the center display screen
. Text Message
Select to turn on or off the vehicle’s text
messaging feature.
. New Text Sound
Select to adjust the volume of the sound
that plays when a new text is received by
a phone connected to the Bluetooth
Š
Hands-Free Phone System. The setting
all the way to the left indicates that the
new text sound will be muted.
. Show Incoming Text
Select “Driver Only” to have incoming
text messages displayed only in the
vehicle information display. Select “Both”
to have incoming text messages dis-
played in both the vehicle information
display and the center display screen.
Select “None” to have no display of
Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-147