New system features, Blind spot warning (bsw) system (if so equipped), Advanced climate control system (if so equipped) – NISSAN 2012 Quest - Quick Reference Guide User Manual
Page 4

To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
2
new system features
BLIND SpOT warNING (BSw) SYSTeM (if so equipped)
The control switch
01
is located on the left side of
the instrument panel.
The system automatically turns on when the engine
is started and the BSW On indicator light on the
switch illuminates.
The indicator light
02
, located in the outside mirror,
will activate when the BSW system detects a vehicle
in the detection zone.
if a turn signal is activated in the direction of a
detected vehicle, a chime sounds twice and the
BSW indicator light will flash.
To cancel the system, push the control switch and
the BSW On indicator light will turn off.
for more information, refer to the “Starting and driving (section 5)” of
your Owner’s Manual.
aDVaNceD cLIMaTe cONTrOL SYSTeM (if so equipped)
The advanced climate control system keeps the air inside the vehicle clean, using ion control
and automatic air intake control with exhaust gas detecting sensor.
When ion control is activated, this unit generates highly concentrated Plasmacluster
®
ions
into the air blown from the vents, reducing the odor absorbed inside the vehicle.
When the automatic air intake control is activated, the exhaust gas detection sensor can detect
odors such as pulp or chemicals, and exhaust gas such as gasoline or diesel. When such
odors or gases are detected, the system automatically changes from the outside air circulation
mode to the recirculation mode.
for more information, refer to the “Monitor, heater, air conditioner, audio, phone and voice recognition systems (section 4)”
of your Owner’s Manual.
01
02