First drive features, Headlight control switch – NISSAN 2014 Pathfinder Hybrid - Quick Reference Guide User Manual

Page 14

To view detailed instructional videos regarding these and other features,

please go to www.nissanownersinfo.mobi.

HEADliGHT CoNTRol SWiTCH

HeADLIGHT cONTROL
Turn the headlight control switch to the

position

to turn on the front parking, tail, license plate and

instrument panel lights. Turn the switch to the

position

to turn on the headlights.

AUTOLIGHT SYSTeM (if so equipped)
The autolight system will automatically turn the

headlights on when it is dark and off when it is light.
The system will keep the headlights on for a period of
time after you turn the ignition off and all doors are closed.

To activate the autolight system, turn the headlight control switch to the AUTo position

then push the ignition switch to oN. To deactivate the autolight system, turn the headlight
control switch to the oFF,

position

HIGH BeAM SeLecT
Push the headlight control switch forward

to select the high beam function. The blue

indicator light

illuminates in the instrument panel. Pull the headlight switch back to the

original position to select the low beam. The blue indicator light will extinguish.

Pull and release the headlight control switch

to flash the headlight high beams on and off.

FOG LIGHT SWITcH
The headlights must be on and the low beams

selected for the fog lights to operate.

Turn the switch (inside collar) to the

position

to turn the fog lights on.

Turn the switch (inside collar) to the oFF position to turn the fog lights off.

LANe cHANGe SIGNAL
To signal a lane change, move the lever up or down to the point where the indicator light

begins to flash, but the lever does not latch.

The turn signal will flash 3 times automatically.

For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.

first drive features

1562941_14b_Pathfinder_HEV_QRG_091913.indd 12

9/19/13 11:11 AM