NISSAN 2014 Murano - Owner's Manual - Manual (Page 174)

SPA2867
Type C
*
1 LOCK button
*
2 UNLOCK button
*
3 Power lift gate button (if so equipped)
*
4 PANIC button
*
5 TRUNK button (CrossCabriolet models)
HOW TO USE REMOTE KEYLESS
ENTRY SYSTEM
When you lock or unlock the doors or the lift
gate/trunk lid, the hazard indicator will flash and
the horn (or the outside chime) will sound as a
confirmation. For details, see “Setting hazard
indicator and horn mode” later in this section.
Locking doors
1. Move the shift lever to the P (Park) position
and push the ignition switch to the OFF
position. Make sure you carry the Intelligent
Key with you.*
2. Close all the doors and lift gate.
3. Push the LOCK button
*
1 .
4. All the doors and the lift gate will lock.
5. The hazard indicator flashes twice and the
horn chirps once.
*: Doors will lock while the ignition switch is in the
ACC or ON position.
Unlocking doors
1. Push the UNLOCK button
*
2 once.
2. The hazard indicator flashes once. The
driver’s door will unlock.
3. Push the UNLOCK button
*
2 again
within 1 minute.
4. The hazard indicator flashes once again. All
the doors and the lift gate will unlock.
All doors will be locked automatically unless one
of the following operations is performed within 1
minute after pushing the UNLOCK
button
*
2 while the doors are locked. If during this 1-
minute time period, the UNLOCK button
*
2
is pushed, all doors will be locked automatically
after another 1 minute.
. Opening any door (including the lift gate) or
trunk
. Pushing the ignition switch
Opening windows
The UNLOCK button
*
2 operation also
allows you to open the window that is equipped
with the automatic open/close function. (See
“Power windows” in the “2. Instruments and
controls” section).
To open the windows, push the door UNLOCK
button
*
2 for about 3 seconds after the
door is unlocked.
To stop opening, release the UNLOCK
button
*
2 .
Windows cannot be closed using the button on
the Intelligent Key.
If the window open operation is stopped in mid-
operation while pushing the UNLOCK
button
*
2 , release and push the UNLOCK
Pre-driving checks and adjustments 3-17