NISSAN 2011 Murano - Owner's Manual - Manual (Page 39)

Black plate (39,1)
[ Edit: 2011/ 7/ 12 Model: Z51-X ]
SSS0996
Install
1. Align the headrest stalks with the holes in
the seat. Make sure that the headrest is
facing the correct direction. The stalk with
the adjustment notches
*
1 must be in-
stalled in the hole with the lock knob *
2 .
2. Push and hold the lock knob and push the
headrest down.
3. Properly adjust the headrest before an
occupant uses the seating position.
JVR0030X
REAR HEADREST (CrossCabriolet
models)
The rear headrests of CrossCabriolet models
cannot be removed or adjusted.
+ Indicates the seating position is not equipped
with a removable or adjustable headrest.
SSS0229A
ARMREST (Hardtop models)
Rear armrest
Pull the armrest forward until it is horizontal.
Safety — Seats, seat belts and supplemental restraint system 1-17