Windshield wiper and washer switch – NISSAN 2013 LEAF - Quick Reference Guide User Manual
Page 15
HIGH BEAM SELECT
Push the headlight control switch forward
04
to
select the high beam function. The blue indicator
light illuminates in the instrument panel . Pull the
headlight switch back to the original position to
select the low beam. The blue indicator light goes off.
Pull and release the headlight control switch
05
to
flash the headlight high beams on and off.
FOG LIGHT SWITCH (if so equipped)
In order to operate the fog lights you must have your
headlights on with the low beams selected.
Turn the switch (inside collar) to the position
06
to turn the fog lights on .
Turn the switch (inside collar) to the OFF position to turn the fog lights off .
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual .
wINDSHIeLD wIPer aND waSHer SwITCH
Move the lever to the following positions to operate
the windshield wipers:
01
Mist (MIST) - One sweep operation of the
front wipers .
02
Intermittent (INT) - Move the lever down to
the INT position and then rotate the control
ring
03
away from you to increase INT
wiper speeds .
04
Low (LO) - Front wipers operate at a
continuous low-speed .
05
High (HI) - Front wipers operate at a
continuous high-speed .
06
Pull the lever toward you to activate the
front washer . The front wipers will operate
several times .
REAR WINDSHIELD WIPER AND WASHER
07
Intermittent (INT) - Rear wiper operates
intermittently .
08
Low (ON) - Rear wiper operates at a
continuous low-speed .
09
Push the lever forward to activate the rear washer .
The rear wiper will operate several times .
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual .
13
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
04
05
03
01
02
04
05
MIST
OFF
INT
INT
LO
ON
HI
06
09
07
08
06
1275820_13_Leaf_QRG_Text-Insert_121912.indd 13
12/19/12 10:11 AM