NISSAN 2013 GT R - Service & Maintenance Guide - Manual (Page 36)

Fluids and Lubricants
B A (B: Before A: AŌer)
Inspect
underbody for leakage and smears of oil, fluid and coolant
Adjust/inspect engine oil level (record temperature,
document leakage and smears)
Adjust engine coolant level and mixture raƟo in the pressurized
radiator reservoir tank
Inspect power steering fluid level and check for leakage
Inspect brake fluid level
Inspect transmission and differenƟal gear oil, record
oil temperature and document leakage and smears
Engine
B A
Inspect area around the catalyƟc converter for heat deterioraƟon
Inspect exhaust finishers and (only for vehicles with GT-R genuine exhaust)
rear bumper clearance
Inspect
and adjust clearance between the exhaust and its surrounding parts
Transmission
B A
Adjust clutch clearance (clutch gear learning)
Inspect whether Ɵght corner braking phenomenon does not become
extremely strong
ADDITIONAL MAINTENANCE ITEMS FOR PERFORMANCE DRIVING – 2013 GT-R
MAINTENANCE RECORD LIST (InspecƟon before and aŌer driving)
InspecƟon Key:
N/A: Normal: N Replace: X Tighten: T Clean: C
Adjust: A Repair: Disassemble: D Lubricate: L Skip Step S
Wheel and Tire
B
A
Apply aluminum tape over the wheel balance weight
Inspect the wheel nuts for deformaƟon
Inspect the mounƟng point of the wheel nut for deformaƟon
Inspect the wheel nut and the wheel hub lock nut for looseness
Tighten the wheel nut with the standard torque
Inspect the wheel bearing (hub) for backlash and the wheel
for rotaƟon
Align the reference marks on the Ɵre and the inner wheel
Inspect the Ɵre and the wheel for direcƟon of rotaƟon deviaƟon
(rim deviaƟon)
Inspect and adjust the Ɵre pressure
Inspect the air valve and nut of the Ɵre for looseness
Inspect the Ɵre for nitrogen leakage
Inspect the groove of the Ɵre
Inspect the Ɵre for uneven and abnormal wear
Inspect the Ɵre for damage and cracks
Inspect the Ɵre side wall for damage
DriveshaŌ
B A
Inspect driveshaŌ universal joint dust boots for cracks and damage
Brake System
B A
Inspect brake piping and hoses for leakages
Inspect brake pads for wear, color/temperature indicaƟon, damage and cracks
Inspect brake disc rotors for wear, damage and cracks
Inspect brake master cylinder and the calipers for fluid leakage
Bleed any air from brake fluid
Inspect the parts and area surrounding the brake rotors for heat deterioraƟon
Perform brake pad break-in (only when engaging in the first performance
driving aŌer replacing the brake pads)
Steering
B
A
Inspect rods and arms of the steering system for looseness,
backlash and damage
Inspect steering gear box for looseness at mounƟng points
Suspension
B
A
Inspect shock absorbers for damage and oil leakage
Inspect suspension for looseness at mounƟng points
connecƟon, backlash and damage
Measure and adjust wheel adjustment
Other Maintenance Items and Replaced Parts
Customer Name:
Address:
Mileage:
GT-R Dealer Name:
Date:
Technician Name:
Memo:
ADDITIONAL MAINTENANCE ITEMS
35