First drive features, Cruise control, Interface – NISSAN 2015 Armada - Quick Reference Guide User Manual
Page 14

To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
12
CRUISE CONTROL
The cruise control system enables you to set a
constant cruising speed once the vehicle has
reached 25 mph (40 km/h).
The system will automatically maintain the set
speed until you tap the brake pedal, accelerate,
cancel or turn the system off.
To activate the cruise control, push the ON/OFF
switch
1
. The CRUISE indicator light in the
vehicle information display will illuminate.
To set a cruising speed, accelerate the vehicle to the desired speed, push the
COAST/SET switch
2
and release. The SET indicator light in the vehicle
information display will illuminate. Take your foot off the accelerator pedal. Your vehicle
will maintain the set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch
3
.
When the vehicle attains the desired speed, release the switch.
4
3
2
1
USB (Universal Serial Bus) CONNECTION PORT/
AUX JACK AND iPOD
®
INTERFACE
The USB port/Aux jack
1
is located in the center
console under the armrest.
When a compatible USB memory device, iPod
®
or
auxiliary device is plugged into the USB port/Aux jack,
compatible audio files stored on the device can be
played through the vehicle’s audio system.
For more information, refer to the “Monitor, climate, audio, phone and
voice recognition systems (section 4)” of your Owner’s Manual.
1
4
STATION PRESET BUTTONS
Six stations can be set for the AM band, 12 for the FM band and 18 for satellite radio.
To store a station in a preset, you must first select a radio band by pressing the
AM/FM button
5
or XM button
6
then tune to the desired AM, FM or satellite
radio station.
Then press and hold the desired station preset button (1-6) until the preset number is
updated on the display and the sound is briefly muted. The channel indicator will then
come on, and the sound will resume. Programing is now complete.
To retrieve a previously set station, select the radio band where the preset was stored
then press the corresponding station select button (1-6).
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)”
of your Owner’s Manual.
FIRST DRIVE FEATURES
1758973_15b_Armada_QRG_091714.indd 12
9/17/14 1:00 PM