Capacities and specifications – FORD 2000 Expedition User Manual
Page 228
Fluid
Ford Part
Name
Application
Capacity
5.4L V8 engine
with 2 row
radiator and aux
rear heat
26.4L
(27.9 quarts)
Front axle
lubricant
Motorcraft SAE
75W-90
Premium 4x4
Front Axle
Lubricant
4x4 vehicles
1.8-2.0L
(3.5-3.7 pints)
Rear axle
lubricant
4
Motorcraft SAE
75W-140
Synthetic Rear
Axle Lubricant
All
2.9-3.1L
(5.5-5.8 pints)
Windshield
washer fluid
Ultra-Clear
Windshield
Washer
Concentrate
All
4.1L
(4.5 quarts)
1
Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. Check the container to verify the fluid being added is of the
correct type. Refer to your Scheduled Maintenance Guide to determine
the correct service interval.
Some transmission fluids may be labeled as dual usage, such as
MERCON
and MERCON V. These dual usage fluids are not to be used
in an automatic transmission that requires use of the MERCON
type
fluid. However, these dual usage fluids may be used in transmissions that
require the MERCON
V type fluid.
MERCON
and MERCON V type fluids are not interchangeable.
DO NOT mix MERCON
and MERCON V. Use of a transmission
fluid that indicates dual usage (MERCON
and MERCON V) in
an automatic transmission application requiring MERCON
may
cause transmission damage. Use of any fluid other than the
recommended fluid may cause transmission damage.
2
Indicates only approximate dry-fill capacity. Some applications may
vary based on cooler size and if equipped with an in-tank cooler. The
Capacities and specifications
228