Capacities and specifications – FORD 2001 Crown Victoria User Manual
Page 221
REFILL CAPACITIES
Fluid
Ford Part Name
Capacity
Engine oil
(includes filter
change)
Motorcraft SAE 5W-20
Super Premium Motor Oil
4.7L (5.0 quarts)
Brake fluid
1
Fill to line on
reservoir
Power steering
fluid
Motorcraft MERCON
ATF Fill to line on
reservoir
Transmission fluid
2
Motorcraft MERCON
V
ATF
13.1L (13.9 quarts)
3
Engine coolant
4
Motorcraft Premium
Engine Coolant
(green-colored) or
Motorcraft Premium Gold
Engine Coolant
(yellow-colored)
15.0L (15.8 quarts)
Fuel tank
N/A
71.9L (19.0 gallons)
Rear axle lubricant
5
Motorcraft SAE 80W-90
Premium Rear Axle
Lubricant
1.8L (3.75 pints)
Windshield washer
fluid
Ultra-Clear Windshield
Washer Concentrate
Fill to line on
reservoir
1
Use only brake fluids certified to meet Ford specifications. Refer to
Lubricant Specifications in this chapter. DOT 3 fluid is recommended.
However, if DOT 3 is not available, DOT 4 fluid can be used.
2
Ensure the correct automatic transmission fluid is used. MERCON
and
MERCON
V are not interchangeable. DO NOT MIX MERCON and
MERCON
V. Refer to the scheduled maintenance guide to determine
the correct service interval.
3
Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be set by the indication on
the dipstick’s normal operating range. Police or Handling Package refill
capacity-12.1L (12.8 quarts).
4
Add the coolant type originally equipped in your vehicle.
Capacities and specifications
221