beautypg.com

Seating and safety restraints – FORD 2002 Taurus v.2 User Manual

Page 137

background image

Attach the tether strap only to the appropriate tether anchor as
shown. The tether strap may not work properly if attached

somewhere other than the correct tether anchor.

1. Position the child safety seat on the seat cushion.

2. Route the child safety seat tether strap over the back of the seat.

For vehicles with adjustable head restraints, route the tether strap under
the head restraint and between the head restraint posts, otherwise route
the tether strap over the top of the seatback.

3. Locate the correct anchor for the
selected seating position.

4. Open the tether anchor cover.

5. Clip the tether strap to the
anchor as shown.

If the tether strap is clipped
incorrectly, the child safety

seat may not be retained properly
in the event of a collision.

6. Refer to the Installing child
safety seats in combination lap and shoulder belt seating positions
section of this chapter for further instructions to secure the child safety
seat.

Seating and Safety Restraints

137