beautypg.com

Seating and safety restraints – FORD 2002 Taurus v.2 User Manual

Page 115

background image

In the event of a collision resulting in the deployment of the
front air bags, the front safety belts must be replaced if they

were in use. Failure to replace the safety belt assembly could result in
severe personal injuries in the event of a collision.

Safety belt usage sensors

The driver and front outboard passenger safety belt buckles are
equipped with sensors that detect if the safety belts are fastened. The
sensors provide information to the Personal Safety System which can
then adapt the air bag deployment or safety belt pretensioner activation
based upon safety belt usage.

The Personal Safety System provides the most benefit to belted
occupants. The system monitors and tailors the air bag

deployment based upon safety belt usage. Failure to properly wear
your safety belt will increase your risk of injury.

Front safety belt height adjustment

Your vehicle has safety belt height
adjustments for the driver and front
passenger. Adjust the height of the
shoulder belt so the belt rests
across the middle of your shoulder.

To lower the shoulder belt height,
pull the control down and slide the
height adjuster down. To raise the
height of the shoulder belt, slide the
height adjuster up. Pull down on the
height adjuster to make sure it is
locked in place.

Position the safety belt
height adjusters so that the

belt rests across the middle of
your shoulder. Failure to adjust
the safety belt properly could
reduce the effectiveness of the
seat belt and increase the risk of
injury in a collision.

Seating and Safety Restraints

115