FORD 2002 Explorer v.1 - Manual (Page 284)

Fluid Ford Part Name Application Capacity
Transfer case Motorcraft
MERCON
௡ ATF
4WD 1.4L
(1.5 quarts)
Engine coolant
4
Premium Engine
Coolant 4.0L SOHC V6
engine without
auxiliary
climate control 15.4L
(16.3 quarts)
4.0L SOHC V6
engine with
auxiliary
climate control 17.2L
(18.2 quarts)
4.6L V8 engine
without
auxiliary
climate control 17.6L
(18.6 quarts)
4.6L V8 engine
with auxiliary
climate control 19.0L
(20.1 quarts)
Front axle
lubricant Motorcraft SAE
80W-90 Premium
Rear Axle
Lubricant 4x4 vehicles 1.7L
(1.8 quarts)
Rear axle
lubricant
5
Motorcraft SAE
75W-140 High
Performance
Synthetic Rear
Axle Lubricant Conventional
Axle
6
1.7L (3.5 pints)
Limited slip
axle
6
1.5L
(3.25 pints)
Windshield
washer fluid Ultra-Clear
Windshield Washer
Concentrate All 4.0L
(4.2 quarts)
1 Ensure the correct automatic transmission fluid is used. MERCON
௡ and
MERCON
௡ V are not interchangeable. DO NOT mix MERCON௡ and
MERCON
௡ V. Refer to your scheduled maintenance guide to determine
the correct service interval.
2 Service refill capacity is determined by filling the transmission to the
bottom of the filler hole with the vehicle on a level surface.
3 Indicates only approximate dry-fill capacity. Some applications may
vary based on cooler size and if equipped with an in-tank cooler. The
amount of transmission fluid and fluid level should be checked by a
qualified technician.
Capacities and specifications
284